NEWS

RUIAO Machine Tool Accessories

Layout and installation method of guide rail shield

Layout and installation method of guide rail shield

The guide rail protective cover is connected with the protected part without contact by installing the middle flange on the two ends of the protected part. There are no metal parts in the shield, so there is no need to worry about the parts loosening when the shield is working, which will cause serious wear and damage to the machine. This method can be used if the shield is used at a moderate temperature.

11

2023

/

01

3 Avoid plastic drag chain electrostatic generation to extend the service life

3 Avoid plastic drag chain electrostatic generation to extend the service life

Plastic chain is shaped like a tank chain, which is composed of many unit links, which rotate freely between links. The same series of plastic chain has the same inner height, outer height and pitch. The inner width and bending radius R of the chain can be selected differently. After opening the cover plate, you can put the cable, oil pipe, gas pipe, water pipe and so on into the tow chain. In addition, the separator can be provided to separate the space in the chain according to the need

11

2023

/

01

How to check machine tool shield

How to check machine tool shield

Machine tool shield in use for a period of time, there will inevitably be some problems. If there is an anomaly, we should first check the protective cover of the machine tool, understand the performance of the fault, fully investigate the fault site, the relevant contents of the working register and buffer working register, understand the content of the executing program segment and self-diagnosis alarm content. In the analysis, we should use the technical files and various data of the machine tool shield, and must find out the various causes of the failure.

11

2023

/

01

Guide rail shield is a design skill

Guide rail shield is a design skill

The guide rail shield is mainly used to protect the machine tool guide rail, so the guide rail shield is a product designed according to the size of the guide rail. The measured data is directly related to the reasonable protection of machine tool guide rail.

11

2023

/

01

Organ type machine tool protective cover outline and instructions for use

Organ type machine tool protective cover outline and instructions for use

The organ type machine tool shield can be improved by using wear-resistant rollers or sliding blocks when sliding on the track. If the acceleration on the organ type shield is relatively large, it is necessary to install tension so that the shield can be evenly elastic. We can think of ways to deal with almost any kind of protective question

11

2023

/

01

Reacquaint yourself with magnetic separators in 3 minutes

Reacquaint yourself with magnetic separators in 3 minutes

Magnetic separator is a kind of universal separation equipment. It is composed of the following parts: reducer, box, magnetic roller and rubber roller. The reducer drives the rotation of the magnetic roll, and the coolant containing powdered magnetic impurities enters the box, and the impurities are absorbed to the outer wall of the magnetic roll, and then the liquid is squeezed out by the rubber roller, and the impurities are separated from the magnetic roll by the scraping plate.

11

2023

/

01

< 1 2 >

Ruiao

A manufacturer of quality drag chain, machine tool protective cover, chip conveyor and hose series.

RUIAO Machine Tool Accessories

Add:Zhifangtou Industrial Park, Cangzhou City,Hebei Province，China. 061000
Tel.: +86-317-4958921/4958927

Fax: +86-317-4958927

Email: info@hbruiao.com

Copyright © 2022 RUIAO

Powered by www.300.cn | SEO tag

5

8

E-mail：

info@hbruiao.com