NEWS

RUIAO Machine Tool Accessories

How to select the appropriate engineering plastic tow chain

How to select the appropriate engineering plastic tow chain

First of all, the selection principle of plastic drag chain: high: choose the built-in cable. Tubing, gas pipe, water pipe, etc., the thickest one as a reference height. Plus at least 10 percent of the height space as the inner height of the tow chain. If the cable tubing, gas pipe, and water pipe need to be overlapped, the actual height after the overlap is used as the reference height.

11

2023

/

01

The importance of running pitch in plastic towing chains

The importance of running pitch in plastic towing chains

Plastic drag chain in the operation of the problem, in the process of the experiment, the same specification of the case, most of the greater the pitch, in the operation of the sound will be more and more loud, but in the manufacturing of the number of segments, the smaller the pitch of the sound will be smaller, so the accuracy of the machine tool will be smaller; If in different specifications, is within a length range of the same, then the greater the pitch, the production of the tow chain will be more uneven, in two aspects will be up the greater, then it will hit the operation of the problem will be greater, but the smaller the pitch, the production will be more flat, then the problem will be smaller.

11

2023

/

01

Nylon tow chain and polypropylene tow chain difference

Nylon tow chain and polypropylene tow chain difference

Because the price of polypropylene material is only half of nylon, some of the more black manufacturers, long polypropylene tow chain posing as good quality nylon tow chain, because of its appearance is very similar, general users are difficult to identify

11

2023

/

01

Layout and installation method of guide rail shield

Layout and installation method of guide rail shield

The guide rail protective cover is connected with the protected part without contact by installing the middle flange on the two ends of the protected part. There are no metal parts in the shield, so there is no need to worry about the parts loosening when the shield is working, which will cause serious wear and damage to the machine. This method can be used if the shield is used at a moderate temperature.

11

2023

/

01

3 Avoid plastic drag chain electrostatic generation to extend the service life

3 Avoid plastic drag chain electrostatic generation to extend the service life

Plastic chain is shaped like a tank chain, which is composed of many unit links, which rotate freely between links. The same series of plastic chain has the same inner height, outer height and pitch. The inner width and bending radius R of the chain can be selected differently. After opening the cover plate, you can put the cable, oil pipe, gas pipe, water pipe and so on into the tow chain. In addition, the separator can be provided to separate the space in the chain according to the need

11

2023

/

01

How to check machine tool shield

How to check machine tool shield

Machine tool shield in use for a period of time, there will inevitably be some problems. If there is an anomaly, we should first check the protective cover of the machine tool, understand the performance of the fault, fully investigate the fault site, the relevant contents of the working register and buffer working register, understand the content of the executing program segment and self-diagnosis alarm content. In the analysis, we should use the technical files and various data of the machine tool shield, and must find out the various causes of the failure.

11

2023

/

01

< 1...6 7 8 9 >

Ruiao

A manufacturer of quality drag chain, machine tool protective cover, chip conveyor and hose series.

RUIAO Machine Tool Accessories

Add:Zhifangtou Industrial Park, Cangzhou City,Hebei Province，China. 061000
Tel.: +86-317-4958921/4958927

Fax: +86-317-4958927

Email: info@hbruiao.com

Copyright © 2022 RUIAO

Powered by www.300.cn | SEO tag

5

8

E-mail：

info@hbruiao.com